1.5mm GSE Textured HDPE Geomembrane For Landfill And Mining Lagoon
ASTM GRI-GM 13 1.5MM HDPE Geomembrane Landfill Pond Liner
Manufacturing Technique
HDPE Geomembrane liner is made from polyethylene polymer materials by the film-blowing process.it is most widely used for solid waste containment (such as landfill liners),mining and water containment applications.
Item
| Product Name: |
1.5mm GSE Textured HDPE Geomembrane For Landfill And Mining Lagoon
ASTM GRI-GM 13 1.5MM HDPE Geomembrane Landfill Pond Liner |
| Thickness: |
0.2mm-3.0mm(Main:0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm) |
| Length : |
50m/roll,100m/roll,150m/roll or follow your request |
| width: |
1m-8m or follow customers' demand, Main width is 4m,5m,5.8m,6.0m |
| Surface |
Both side smooth/both side textured
one side textured one side smooth, or as your request |
| Color: |
White,Black,Green,Blue,mainly black |
| Material: |
HDPE,LDPE,LLDPE, ( 100% Virgin) |
| Certification: |
ISO9001:2008,CE |
| Standard: |
ASTM GRI-GM13 |
Product Description
Geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical engineering related material so as to control fluid (or gas) migration in a human-made project,structure,or system.Geomembranes are made from relatively thin continuous polymeric sheets,but they can also be made from the impregnation of geotextiles with asphalt,elastomer or polymer sprays,or as multilayered bitumen geocomposites.Continuous polymer sheet geomembranes are,by far,the most common.
Main Features
1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance
4.Puncture-resisting
5.Nontoxic,non-tasteness.Long life:over 100 years underground without sunlight.
Packaging & Shipping
The geomembrane roll are in the hand sewing woven bag packing,safe and scratch-proof.The bag color can be customized,with your own logo.
Application
Various waterproof and anti-seepage projects such as landfills,solid waste treatment stations,tailings storage yards
,sewage ponds,petrochemicals,construction,water conservancy,mining,landscape gardens,subway tunnels,aquaculture,livestock biogas digesters,etc.
Environmental protection projects:Landfill,sewage treatment plants,power plant regulating pools,industrial and hospital solid wastes,etc.
Mining:heap leaching platforms,conduit and retention channels and wells for liquid solutions,final disposal reservoirs.
Index
S/N
|
Item |
Index |
| Thickness mm |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
| 1 |
Density g/cm3 |
≥0.940 |
| 2 |
Tensile yield strength (vertical and horizontal) N/mm |
≥11 |
≥15 |
≥18 |
≥22 |
≥29 |
≥37 |
≥44
|
| 3 |
Tensile breaking strength (vertical and horizontal) N/mm |
≥20 |
≥27 |
≥33 |
≥40 |
≥53 |
≥67 |
≥80 |
| 4 |
Elongation (vertical and horizontal) % |
- |
- |
- |
≥12 |
| 5 |
Elongation at break (vertical and horizontal) % |
≥700 |
| 6 |
Tearing load at right angle (vertical and horizontal) N |
≥93 |
≥125 |
≥160 |
≥190 |
≥250 |
≥315 |
≥375 |
| 7 |
Anti-puncture strength N |
≥240 |
≥320 |
≥400 |
≥480 |
≥540 |
≥800 |
≥960 |
| 8 |
Tensile load stress cracking (tensile method of dead load of the cut) h |
_ |
≥300 |
| 9 |
Carbon black content % |
2.0~3.0 |
| 10 |
Carbon black dispersion |
The number of Level 3 among 10 data is not more than one; Level 4 and Level 5 are not allowed. |
| |
Oxidation induction time (OIT) min |
Oxidation induction time under normal pressure ≥100 |
| 11 |
Oxidation induction time under disjoining pressure ≥400 |
| 12 |
85°C thermal aging (retention rate of OIT under normal pressure after 90d) % |
≥55 |
| 13 |
Ultraviolet resistance (retention rate of OIT after 1600h ultraviolet irradiation) % |
≥50 |
| Note: Technical performance index of thickness specification not listed in the table shall be implemented according to interpolation method. |
| For two indexes of Item 11 and Item 13, select one from retention rate of OIT under normal pressure and retention rate of OIT under high pressure and carry out the test. |
Company introduction
Shandong Dajin is a Chinese company providing geosynthetics anti-leakage solutions,products and services.Its main application fields include landfill,storage and management of solid,liquid and gas hazardous wastes in mining,petrochemical,reservoirs,roads,tunnels and aquaculture.The company's team was built in 2002;In 2019,an international trading company was established.For its 18 years in the business,it has been committing to the production,research and development of innovative geosynthetic anti-seepage products.The company's main products are polyethylene geomembrane,geotextile,geocomposite drainage net,and geocomposite clay liner.
Located in Jinan City,Shandong Province,China,The company occupies an area of 310,000 square meters;meanwhile,it has 12 internationally advanced production lines,which includes 3 geomembrane blowing production lines,1 geomembrane calendering production line,1 geomembrane roughening production line,and 2 filament needle-punched geotextile production lines,2 short-wire needle-punched geotextile production lines,2 geocomposite drainage net production lines,and 1 bentonite waterproof blanket production line.These production lines can assure customers' requirements by providing high-quality products and maximum production capacity.The maximum width of the geomembrane produced is 8 meters,which can reduce the number of overlaps.construction period and leakage risks to a great extent.
The company abides by production quality control procedures and testing standards strictly;in addition,The company are cooperating with internationally renowned raw material suppliers instead of any recycled materials,to guarantee the highest quality geomembrane product with scientific formula.
Design
The Dajin engineering team can provide solid advice on all types of Seepage control insustry,as well as their correct design for projects,including construction details and advice on the general configuration of the project.
Documentation
Each roll of Dajin geomembrane has its own identification number.The identification number is traceable in line with the quality control plan.Dajin can add the necessary documentation or modify the packing for countries and territorieswith special product certification requirements.
FAQ
Q: Are you trading company or manufacturer?
We are factory.
Q:Is the quality of your products stable?
The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.
Q:Can you do OEM?
Yes, of course. We can produce the products as your request.
Q: Do you provide samples? is it free?
Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment?
Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance,balance before shipment.
If you have another question, please feel free to contact us at any time.
){kind=link}