Road Reinforce Long Fiber Polyester Non Woven Geotextile Fabric
Continuous Filament spunbonded non woven needle punched geotextile is a kind of non-woven fabric reinforced by polyester filament after laying mesh. It does not need heat treatment and does not contain any chemical additives.Filament needle punched nonwoven geotextile using all new polyester resin spunbonded continuous filament needle punched geotextiles are manufactured by the extrusion of fibers which are then laid down on a manufacturing "bed" and then needle punched from both top and bottom to entangle the fibers to produce a dimensionally stable geotextile.
Item Specifications
| Mass per Square meter g/m2 |
100 |
150 |
200 |
300 |
350 |
400 |
500 |
600 |
800 |
100 |
| Nominal Breaking Strength |
4.5 |
7.5 |
10 |
15 |
17.5 |
20 |
25 |
30 |
40 |
50 |
| KN/m |
|
|
|
|
|
|
|
|
|
|
| MD/CD Break Strength |
4.5 |
7.5 |
10 |
15 |
17.5 |
20 |
25 |
30 |
40 |
50 |
| ≥kN/m |
|
|
|
|
|
|
|
|
|
|
| Elongation At Break % |
40%-80%
|
|
|
|
|
|
|
|
|
|
| CBR KN |
0.8 |
1.6 |
1.9 |
2.9 |
3.3 |
3.9 |
5.3 |
6.4 |
7.9 |
8.5 |
| MD/CD Tearing Strength KN |
0.14 |
0.21 |
0.28 |
0.42 |
0.49 |
0.56 |
0.7 |
0.82 |
1.1 |
1.25 |
| Thickness(mm) |
0.8 |
1.2 |
1.6 |
2.2 |
2.5 |
2.8 |
3.4 |
4.2 |
5.5 |
6.8 |
| Unit Weight Tolerance % |
-5 |
|
|
|
|
|
|
|
|
|
| EOSØ90(Ø95), mm |
0.05-0.2 |
|
|
|
|
|
|
|
|
|
| Vertical Permeability |
K×(10-1-10-3) K=1.0-9.9 |
|
|
|
|
|
|
|
|
|
| Coefficient cm/s |
|
|
|
|
|
|
|
|
|
|
| Width Deviation |
-0.5 |
|
|
|
|
|
|
|
|
|
Property
1.high strength, at the same gram weight, the longitudinal and horizontal tension are higher than other needled non-woven fabrics.
2.high extension, the product has a good elongation under a certain stress, can make geotextile adapt to uneven base.
3.high temperature resistance. The temperature of asphalt laying on geotextile is generally 150ºC ~ 165ºC, while the polyester spunbonded needle cloth for geotextile begins to soften at more than 210ºC. At this time, the product can still maintain the structural integrity and physical properties unchanged.
4.plane drainage and vertical permeability. Due to the large thickness of the product and its reinforcement by acupuncture, it has good plane drainage performance and vertical permeability.
5.anti-aging, the product has very high anti-ultraviolet radiation ability, not easy to degradation.
6.corrosion resistance: the product is resistant to corrosion of common chemical substances in soil, gasoline, diesel, etc.
7.friction resistance, the friction coefficient of the product is higher than other conventional geotextile, not easy to fluff and damage.
8.creep resistance. The product has good creep resistance and long-lasting function
Product Application
1. Unpaved and paved roads in airport runways
2. Landfills and stone base courses
3. Sidewalks and sand drainage layers
4. Parking lots and curb areas
5. Green areas and recreational facilities
Packaging & Shipping
Quality Control
The Dajin quality plan is designed to provide customers with the highest standards of product control and reduce our product returns rate to zero. The checklist covers a wide range of aspects, from the quality of the raw material all the way through to the roll labels.
Company Introduction
Shandong Dajin is a Chinese company providing geosynthetics anti-leakage solutions, products and services. Its main application fields include landfill, storage and management of solid, liquid and gas hazardous wastes in mining, petrochemical, reservoirs, roads, tunnels and aquaculture. The company's team was built in 2002; In 2019, an international trading company was established. For its 18 years in the business, it has been committing to the production, research and development of innovative geosynthetic anti-seepage products. The company's main products are polyethylene geomembrane,geotextile, geocomposite drainage net, and geocomposite clay liner.
Located in Jinan City, Shandong Province, China, The company occupies an area of 310,000 square meters; meanwhile, it has 12 internationally advanced production lines, which includes 3 geomembrane blowing production lines, 1 geomembrane calendering production line, 1 geomembrane roughening production line, and 2 filament needle-punched geotextile production lines, 2 short-wire needle-punched geotextile production lines, 2 geocomposite drainage net production lines, and 1 bentonite waterproof blanket production line. These production lines can assure customers' requirements by providing high-quality products and maximum production capacity. The maximum width of the geomembrane produced is 8 meters, which can reduce the number of overlaps, construction period and leakage risks to a great extent.
Guarantee
Dajin provides a 10-year guarantee on all manufactured geomembranes. Based on our experience, the useful life of Dajin's high-performance products under almost any normal conditions of service can be measured in decades and is probably ove100 years.
Our Advantage
1.Average feedback time Less than 2 hours;
2. Senior engineers with more than 10 years experiencelead our professional technical team
3.Establish test result database for each batch of products
4.Raw material QC system,production process QC system,pre-shipment QC system
5.Dajin can provide installationand technical guidance services;
6.Third party test or inspection;
7.Sample availability: A4 size sample or smaller size is available in free cost.
FAQ
Q:Can you do OEM?
A:Yes, of course. We can produce the products as per your request.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 10-15 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance,balance before shipment.
If you have another question, please feel free to contact us at any time.
Audited Supplier 
){kind=link}
){kind=link}