Free Sample 300g Nonwoven Pet Geotextile For Road Construction
Product Description
Continuous Filament spunbonded non woven needle punched geotextile is a kind of non-woven fabric reinforced by polyester filament after laying mesh. It does not need heat treatment and does not contain any chemical additives.Filament needle punched nonwoven geotextile using all new polyester resin spunbonded continuous filament needle punched geotextiles are manufactured by the extrusion of fibers which are then laid down on a manufacturing "bed" and then needle punched from both top and bottom to entangle the fibers to produce a dimensionally stable geotextile.
Item
| Mass per Square meter g/m2 |
100 |
150 |
200 |
300 |
350 |
400 |
500 |
600 |
800 |
100 |
| Nominal Breaking Strength |
4.5 |
7.5 |
10 |
15 |
17.5 |
20 |
25 |
30 |
40 |
50 |
| KN/m |
| MD/CD Break Strength |
4.5 |
7.5 |
10 |
15 |
17.5 |
20 |
25 |
30 |
40 |
50 |
| ≥kN/m |
| Elongation At Break % |
40%-80%
|
| CBR KN |
0.8 |
1.6 |
1.9 |
2.9 |
3.3 |
3.9 |
5.3 |
6.4 |
7.9 |
8.5 |
| MD/CD Tearing Strength KN |
0.14 |
0.21 |
0.28 |
0.42 |
0.49 |
0.56 |
0.7 |
0.82 |
1.1 |
1.25 |
| Thickness(mm) |
0.8 |
1.2 |
1.6 |
2.2 |
2.5 |
2.8 |
3.4 |
4.2 |
5.5 |
6.8 |
| Unit Weight Tolerance % |
-5 |
| EOSØ90(Ø95), mm |
0.05-0.2 |
| Vertical Permeability |
K×(10-1-10-3) K=1.0-9.9 |
| Coefficient cm/s |
| Width Deviation |
-0.5 |
Main Features
1. UV resistant
2. High temperature resistance to up to 230ºC maintaining structure stability and original physical properties
3. High flat drainage and vertical permeability
4. High creep resistance
5. Resistance of erosion of chemicals in soil as well as the corrosion of gasoline and diesel etc
6. High elongation under certain stress, thus able to adapt to uneven and irregular bases
Packaging & Shipping
Application
1. Unpaved and paved roads in airport runways
2. Landfills and stone base courses
3. Sidewalks and sand drainage layers
4. Parking lots and curb areas
5. Green areas and recreational facilities
Company introduction
Shandong Dajin is a Chinese company providing geosynthetics anti-leakage solutions, products and services. Its main application fields include landfill, storage and management of solid, liquid and gas hazardous wastes in mining, petrochemical, reservoirs, roads, tunnels and aquaculture. The company's team was built in 2002; In 2019, an international trading company was established. For its 18 years in the business, it has been committing to the production, research and development of innovative geosynthetic anti-seepage products. The company's main products are polyethylene geomembrane,geotextile, geocomposite drainage net, and geocomposite clay liner.
Located in Jinan City, Shandong Province, China, The company occupies an area of 310,000 square meters; meanwhile, it has 12 internationally advanced production lines, which includes 3 geomembrane blowing production lines, 1 geomembrane calendering production line, 1 geomembrane roughening production line, and 2 filament needle-punched geotextile production lines, 2 short-wire needle-punched geotextile production lines, 2 geocomposite drainage net production lines, and 1 bentonite waterproof blanket production line. These production lines can assure customers' requirements by providing high-quality products and maximum production capacity. The maximum width of the geomembrane produced is 8 meters, which can reduce the number of overlaps, construction period and leakage risks to a great extent.
Design
The Dajin engineering team can provide solid advice on all types of Seepage control insustry, as well as their correct design for projects, including construction details and advice on the general configuration of the project.
Documentation
Each roll of Dajin geomembrane has its own identification number. The identification number is traceable in line with the quality control plan. Dajin can add the necessary documentation or modify the packing for countries and territorieswith special product certification requirements.
Quality plan
The Dajin quality plan is designed to provide customers with the highest standards of product control
and reduce our product returns rate tozero. The checklist covers a wide range of aspects, from the
quality of the raw material all the way through to the roll labels.
Installation
Upon request by the customer, Dajin can also offer a full turnkey installation service, covering the materials
manufactured by Dajin, any other geosynthetics products, installation and all additional materials required to
fully complete the project.We can supply supervisors and installers, with or without welding equipment, such
as machines and tools, to manage a group of local staff supplied by the customer. We can also provide
training courses to staff provided by the customer.
Guarantee
Dajin provides a 10-year guarantee on all manufactured geomembranes. Based on our experience, the useful
life of Dajin's high-performance products under almost any normal conditions of service can be measured in
decades and is probably ove100 years.
FAQ
Q: Are you trading company or manufacturer?
We are factory.
Q:Is the quality of your products stable?
The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.
Q:Can you do OEM?
Yes, of course. We can produce the products as your request.
Q: Do you provide samples? is it free?
Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment?
Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance,balance before shipment.
If you have another question, please feel free to contact us at any time.
Audited Supplier 
){kind=link}
){kind=link}